Between Cisco and Juniper
Sekedar berbagi catatan persamaan perintah-perintah yang biasa digunakan antara perangkat Router Cisco & Router Juniper :
~=-=~
Command Cisco
- Show version
- Show user
- Show diag
- Show running-config
- Show run interface atm2/0
- Show run interface atm2/0.100
- Show interfaces description
- Show interfaces description | include MPLS
- Show ip ospf neighbor
- Show ip route vrf PELANGGAN
- Show ip route vrf PELANGGAN| include 192.168.255.2
- Show ip vrf
- Show mpls interface
- Ping 192.168.255.1
- Ping vrf INTERNET 202.143.60.21
- Telnet 192.168.255.1
- Telnet 202.152.0.2 /vrf INTERNET
- Show ip bgp vpnv4 vrf PELANGGAN-VPN sum
Command Juniper
-
Show version atau Show system uptime
-
Show system users
-
Show chassis hardware
-
Show configuration
-
Show configuration interfaces at-0/0/0
-
Show configuration interfaces at-0/0/0 unit 100
-
Show interfaces description
-
Show interfaces descriptions | match MPLS
-
Show ospf neighbor
-
Show route table PELANGGAN
-
Show route table PELANGGAN | match 192.168.255.2
-
Show route instance atau Show route instance detail
-
Show mpls interface atau Show ldp neighbor
-
Ping 192.168.255.1
-
Ping routing-instance INTERNET 202.143.60.21
-
Telnet 192.168.255.1
-
Telnet routing-instance INTERNET 202.143.60.21 atau Telnet 202.143.60.21 routing-instance INTERNET
-
Show bgp summary instance PELANGGAN-VPN
Hasil
-
Melihat versi software, dan uptime router
-
Melihat user yang lagi masuk
-
Melihat hardware dan card terpasang
-
Melihat konfig router
-
Melihat konfig router
-
Melihat konfig router
-
Melihat deskripsi di interface
-
Melihat deskripsi di interface
-
Melihat router yang aktif OSPF
-
Melihat vrf yang ada di PE
-
Melihat vrf yang ada di PE
-
Melihat vrf yang ada di PE
-
Melihat mpls yang aktif
-
Ping test ke IP 192.168.255.1
-
Ping test ke IP vrf INTERNET 202.143.60.21
-
Telnet ke IP 192.168.255.1
-
Telnet ke IP vrf INTERNET 202.143.60.21
-
Melihat BGP di vrf PELANGGAN-VPN
~=-=~